Get in touch with Suzhou UDTECH Technology Co., Ltd. Company
Spindle and Shift Planner
Every winder is priced and rated per spindle, so the question behind a quotation is how many spindles your output actually needs. This works from your own numbers rather than from anyone’s published pieces-per-day figure, because a piece rate quoted without its micron rating, diameter and length is not comparable between suppliers.
The output you need, not the output a supplier advertises.
Ask each supplier for this at YOUR micron, diameter and length.
Two shifts is 16 hours; continuous running is 24.
Yarn changes, doffing and setup losses.
Enter your numbers and press plan.
Why this matters when you compare quotations: winding time per cartridge rises with length, with wall thickness and with a tighter micron rating, because all three mean more yarn on the core. A supplier quoting a headline rate at 10 inch is not describing the same machine hour as a supplier quoting at 40 inch.
